USD 139.99/pieceUSD 19.99/pieceUSD 75.99/pieceUSD 118.99/pieceUSD 98.99/pieceUSD 118.99/pieceUSD 99.99/pieceUSD 98.99/piece
1.A complete learning kit based on Raspberry Pi (not included), to be assembled by yourself into the PiCar-S.
2.Detailed user manual booklet for assembly procedures, code explanation and schematic diagrams for easier learning.
3.Comes with three sensor modules including ultrasonic obstacle avoidance, light follower, and line follower. The ultrasonic module is able to detect wider angle, making the obstacle avoidance more effective.
4.Dimension: 260*170*80mm; Operating Voltage: 7V-12V.
5.Powered by 2 18650 batteries (not included); charge display by LEDs on the Robot HATS module.
6.With compact structure, artistic design and simple wiring. The front part can be extended to install a variety of modules, allowing the car to achieve more features.
The PiCar-S is a cool smart car that can work with Raspberry Pi model B+, 2 model B and 3 model B. The PiCar-S car robot is mainly built by a set of 3mm acrylic plates, using the Raspberry Pi for master control, Robot HATS for power, TB6612 for driver, and PCA9685 16-ch I2C Bus PWM driver for servos driving and motor speed adjustment. Equipped with three sensor modules including ultrasonic obstacle avoidance, light follower, and line follower, you can better learn the programming on how to control the car. After programming, the car can realize obstacle avoidance, light following, line following, etc. More functions about it are under exploration! You may visit our website www.sunfounder.com to download the related code and view the user manual on LEARN -> Get Tutorials and watch related videos under VIDEO, or clone the code on our page of github.com at https://github.com/sunfounder/SunFounderPiCar-S Specification
Supply Input Voltage: 7V-12V (by 2 18650 batteries)
Dimension: 270x170x80 mm
1 Set x Acrylic Plate
1 * Robot HATS
1 * PCA9685 PWM Driver
1 * TB6612 Motor Driver
1 * 5-CH Line Follower Module
1 * Ultrasonic Obstacle Avoidance Module
1 * Light Follower Module
2 * 18650 Battery Holder
2 * DC Gear Motor
1 * SunFounder SF0180 Servo
2 * Rear Wheel
2 * Front Wheel
1 * USB Wi-Fi Adapter
1 * Ribbon (30cm)
1 * Cross Screwdriver
1 * Cross Socket Wrench
1 * M2.5/M4 Small Wrench
1 * M2/M3 Small Wrench
Needed screws, nuts, and standoffs