STM32 Nucleo Board XNUCLEO-F411RE Package A Nucleo Compatible with NUCLEO-F411RE, Comes with Various Sensors

STM32 Board XNUCLEO-F411RE Package A , Compatible with NUCLEO-F411RE, Comes with Various Sensors

STM32 Development Board, Supports Arduino, Compatible with NUCLEO-F411RE, Comes with Various Sensors

Overview

This development kit includes :

• XNUCLEO-F411RE (STM32 Development Board, Supports Arduino, Compatible with NUCLEO-F411RE)
• IO Expansion Shield (Provides interfaces for connecting XBee, WiFi-LPT100, and sensors)
• Sensors Pack (Gas, Color, Flame, Hall, IR, UV, Laser, Sound, Temperature and Humidity, Tilt, Liquid level, etc.)

Features

• Compatible with NUCLEO-F411RE, onboard Cortex-M4 microcontroller STM32F411RET6
• Arduino connectivity support, easy to connect with various Arduino shields and access the massive Arduino resources
• ST Morpho headers provide full access to all STM32 I/Os, easy for peripheral expansion
• Supports mbed, build prototype quickly by mbed SDK and online tools
• Comprehensive free software HAL library including a variety of software examples
• Comes with a separated ST-LINK/V2 module

Advantages

1. STM32F411RET6
   • Core : ARM® 32-bit Cortex™-M4
   • Operating frequency : 100MHz
   • Operating voltage : 1.7V-3.6V
   • Package : LQFP64
   • Memories : 512kB Flash, 128kB SRAM
   • Interfaces : 1 x SDIO, 1 x USB 2.0 FS, 5 x SPI or 5 x I2S, 3 x USART, 3 x I2C
   • AD/DA : 1 x AD (12 bit, 16 channels)
2. SPX3819M5 : 3.3V voltage regulator
3. AMS1117-5.0 : 5.0V voltage regulator
4. CP2102 : USB to UART convertor
5. Arduino connector : for connecting Arduino shields
6. ICSP interface : Arduino ICSP
7. USB TO UART : for debugging
8. USB connector : USB communication interface
9. SWD interface : for programming and debugging
10. ST Morpho headers : access to VCC, GND and all the I/Os, easy for expansion
11. 6-12V DC input
12. User button
13. Reset button
14. Power indicator
15. User LED
16. 500mA fast self-recovery fuse
17. Serial port Rx/Tx indicator
18. 8MHz crystal
19. 32.768KHz crystal
20. ADC/I2C selection jumper
    • short A and B : Arduino A4, A5 is used as I2C
    • short B and C : Arduino A4, A5 is used as ADC
21. UART selection jumper
22. MCU current test jumper : for low power tests
23. Power selection jumper
    • short 5V and U5V : powered from USB connection
    • short 5V and E5V : powered from external power supply
24. USB enable jumper
    • short the jumper to enable
    • open the jumper to disable
25. User button jumper
    • short the jumper to connect to I/Os used in example code
    • open the jumper to connect to other custom pins via jumper wires
26. User LED jumper
    • short the jumper to connect to I/Os used in example code
    • open the jumper to connect to other custom pins via jumper wires

XNUCLEO-F411RE Expansion Headers

XNUCLEO-F411RE Photos

XNUCLEO-F411RE STM32 development board
XNUCLEO-F411RE STM32 development board back view
XNUCLEO-F411RE STM32 development board
XNUCLEO-F411RE STM32 development board back view
Connecting with ST-LINK/V2 (mini)
Connecting with sensors

XNUCLEO-F411RE Dimension

Downloads

Development resources: demo codes, schematic, datasheets, etc.
www.waveshare.com/wiki/XNUCLEO-F411RE

Package Contains

1. XNUCLEO-F103RB x 1
2. ST-LINK/V2 (mini) x 1
3. USB Type A Plug to Micro B Plug Cable x 1
4. USB Type A Plug to Receptacle Cable x 1
5. IO Expansion Shield × 1
6. Sensors Pack× 1

1 2 3 4 5 6

For large quantity, feel free to contact us for discount price!